Kaolin Grinding Mill has a High Demand

Kaolin and Kaolin Grinding Mill

Kaolin is a non-metallic mineral resource, pure kaolin is white and delicate, soft soil-like, with good plasticity and fire resistance and other physical and chemical properties. Kaolin is widely used in high-grade paint, paint, paper, rubber and other industries, playing a great role. The development of the domestic market makes demand for kaolin very high, so demand for Kaolin Grinding Mill is high too. 

As to Kaolin ultrafine processing, we recommend  Kaolin ultrafine grinding mill. It can meet its high quality requirements.

Working Principle of Kaolin Grinding Mill

Under the drive of the motor, the grinding disc of the superfine mill turns. At the same time the wind goes into the ultra-fine grinding mill from the intake, Kaolin is feeded onto the center of the 

disc. Under the action of centrifugal force, the material moves evenly from the center to the edge of the grinding disc. When passing through the grinding roller on the roller area, material is grinded by roller, when large pieces of material directly crushed, and fine material after squeezed forms material bed for inter-granular smash.

At this time, the crushed material continues to move to the edge of the disc until it is taken away by the strong air flow at the wind ring, while the larger particles of materialfall back to the mill plate to continue to be crushed. When the material in the airflow passes through the upper separator, the coarse particles are returned to the grinding disc under the action of the rotor blades. Qualified fine powder is discharged together with the air, and collected by the collector of the system. The powder, which is collected, is finished product of  Kaolin Ultrafine Grinding Mill.

At present, kaolin production, development, application in the world, is still in the rising stage. As high-quality ultra-fine kaolin in the domestic market is in short supply, the development of Kaolin Grinding Mill is also very promising. If you have any needs for Kaolin Grinding Mill, please come to Shanghai Clirik! 

More info please visit: http://www.grindingmill.in/news/120.html

Use of Diatomite Powder

In recent years, with the increasingly hot application of diatomaceous earth in decoration market, the concept of diatomaceous earth is gradually being understood, but in addition to be used as decoration materials, diatomite has many applications in life.Only Processed by Diatomite Powder Mill, we can Diatomite Powder to use.

First, diatomite powder is used in home foot pad

Diatomite itself is not toxic, can adjust the humidity, purify the air, which make it to be a high-quality material of natural diatomite pad. People's requirements for household items are mainly concentrated in: comfortable and practical, economic and environmental protection, good quality and other aspects. And an excellent hygroscopic
diatomite pad, compared to the traditional Ottomans, is easy to dry and clean, not easy to mold, no bacteria, and so on.

Second, diatomite powder is applied to artificial leather

If take diatomite and leather shoes together, many people think it as incredible. But things are often so amazing, do not be surprised, and leather shoes on your feet are highly possible to be added diatomaceous earth constituents. Diatomite has a very good sun insulation and soft texture. Add diatomite into artificial leather, you can make shoes more durable, and greatly reduce production costs.

Third, diatomite powder is applied to mosquito coils

In the summer, we can not do without mosquito coils. In our commonly used mosquito coils, in fact, also added a diatomite composition, which is the use of super adsorption performance of diatomite. It can better adsorb added mosquito repellent drugs in mosquito coils, make mosquito coils better play insect repellent effect.
In addition, using this feature, diatomite is also often added to pesticide to protect crops against pests.

Four, diatomite powder is applied to the coaster

Coasters sets of diatomite solve the the little trouble of summer drinking.  It prevents the cup from leaking on the table. In addition to the function of the coaster, but also as a large piece of desiccant, which has good moisture absorption effect in the wardrobe. And it has advantages of mouldproof , insect-resistant , remove odor.

We are Shanghai Clirik Machinery:  powder-mill.net

Although it seems inconspicuous, diatomite has a very wide range of uses in life. There are also a variety of diatomite production of small gadgets, which are delicate and lovely. Of course, maximum performance of role of diatomite which has been processed by Diatomite Powder Mill, is still for interior decoration! 

More please visit:  http://www.powder-mill.net/news/Application-of-Diatomite-Powder.html

Operation and Maintenance of Ball Mill

Ball mill has features of high operation rate, grinding effect, and we must follow close to the line of the operation procedures and maintenance procedures of ball mill.

1.Before the start ball mill, you should check whether the connection bolts are tightened, and tightening condition of the spoon head of the ore feeder, and key of gears, couplings. And, you should check that whether the fuel tank and oil in reducer is sufficient, whether the entire lubrication device and instrument with or without defects, and whether Pipeline is open. In addition, Check if there is the Debris which impedes operation around ball mill and classifier. And then turn the ball mill with a crane disk a week, loosening the ball tube and ore charge, and check the meshing of the ring gear and pinion, which is to check whether it is with or without abnormal sound.

2.Starting sequence of Ball mill is: first to lubricating oil pump of ball mill, when the oil pressure reaches 1.5-2.0 kg/cm, it is allowed to start the ball mill, and then start the classifier. When everything is OK, we bagin to feeding. 

3.In the operation of ball mill, we must always pay attention to bearing temperature, shall not exceed 50-65℃. you should always pay attention to the motor, voltage, current, temperature, sound and lubrication system, temperature of oil in the tank should not exceed 35-40℃. The pressure to the tubing should be maintained at 1.5 to 2.0 kg/cm2.

4.Check the lubrication of the transmission parts of the gears, main bearings, classifiers, etc., and observe whether there is blockage and leakage of sand in front and rear end caps of ball mill, simplified, discharge ore tank, overflow tank of classifier. And you often note the changes of nature of the ore to take timely appropriate measures in the light of the circumstances.

5.At last, when stop the ball mill, first to stop the feeding machine. After the ore treatment is finished, stop the ball mill motor, and finally stop the pump. Use the lifting device of the classifier to lift the spiral out of the sand surface, and then stop the classifier.

This is daily Operation and Maintenance of Ball Mill, if you have other queation about ball mill, please connect with us.

If you want to know more details, please visit: http://www.clirikchina.com/

Notes for Ultrafine Powder Grading process

You know, after processed by ultra fine grinding mill, ultrafine powder should be graded. And, efficient is a necessary characteristics of industrial powder equipment. In addition to the performance of the device itself, we can also regulate our own operating behavior to extend the life of the equipment and improve efficiency.

In superfine powder grading process, we-Shanghai Clirik Machinery need to pay attention to several points as follows:

1.Classification and material properties

The physical properties of the powder to be graded are one of the important factors affecting the classification process. Such as for the abrasive powder, wear-resistant materials or wear-resistant lining should be used; For powder with requirements of iron pollution, we should use iron insulation lining to prevent bringing into the iron because of the erosion of the powder.

2.Pre-dispersion of powder

Poor dispersion of the powder is often expressed as coarse particles. In order to achieve an excellent grading effect, particle dispersion is an important manifestation of classification technology. Among them, the choice of the correct dispersant not only helps to improve the efficiency of ultra-fine grading operations, but also not affects the performance of the powder.

3.Classification area is smooth

This is the key to the success or failure of the classification process. No matter what sort of force field of classification, Common requirement is a strong ability to classify, clear grading surface, rapid classification and so on. In addition, there is also a need to minimize or avoid the presence of vortices, that is, unity of streamline form.

As a multi-disciplinary, multi-disciplinary horizontal cross-industry, the powder industry in recent years is concerned by various industries. Ultrafine powder production and grading technology has also been rapidly developed. However, with the rapid development of modern high-tech and new material industry, there are problems and challenges in the classification of superfine powder grading technology. Therefore, it is necessary to strengthen the research on superfine classification technology and equipment.

About more deatils: http://www.clirik.com/hyxw/Precautions-for-Ultrafine-Powder-Grading.html